非球面レンズペア
- Near Aberration-Free One-to-One Imaging
- Direct Laser Diode to Fiber Coupling
- 600 - 1050 nm or 1050 - 1700 nm AR Coating
C220MP-C
C230260P-C
C230220P-B
Please Wait
当社の非球面レンズペアはほとんど球面収差のない 1対1の結像を作ります。各レンズペアは、2つの同一な非球面レンズで構成されています。これらの非球面レンズは、事前にアライメントされて取付け用のM11 x 0.5外ネジがついた金属製筐体にマウントされています。開口は0.40または0.25、ARコーティングは600~1050 nmまたは1050~1700 nmからお選びいただけます。
取付けの際には、アダプタRMS11Pを使って、この非球面レンズペアを標準のRMSネジに対応させることができます。レンズペアを当社のレンズチューブ内に取り付ける際には、RMSネジ部品のSM1レンズチューブ取付け用アダプタSM1A3のご使用をお勧めします。フレクシャーステージマウントHCS013とRMSアダプタRMS11Pをご使用いただくと、レンズペアを当社のフレクシャーステージに取り付けることができます。また、RMSネジを使用して、当社のキネマティックマウントKM100Rに取り付けることもできます。
Specifications | |||
---|---|---|---|
Item # | C110MP-B | C220MP-B | C220MP-C |
Numerical Aperture | 0.40 | 0.25 | 0.25 |
Coating | B: 600 - 1050 nm | B: 600 - 1050 nm | C: 1050 - 1700 nm |
Distance of Focal Point from Housing Front | 1.800 mm | 6.096 mm | 6.096 mm |
Housing Thread | M11 x 0.5 |
Posted Comments: | |
randy.sabatini
 (posted 2018-08-15 19:05:39.613) Are there any hopes of getting an aspheric lens pair with A AR coating (i.e. visible antireflection)? YLohia
 (posted 2018-08-16 08:35:39.0) Yes, it is possible for us to offer these with the A coating by requesting a custom quote from techsupport@thorlabs.com. I will reach out to you directly with more information. simon.poland
 (posted 2018-05-01 15:58:33.947) Can you provide matched aspheric pairs with the A-coating (400-700nm)? nbayconich
 (posted 2018-05-01 02:51:20.0) Thank you for your feedback. Yes we can provide a -A coated version of the C110MP lens pairs. I will contact you directly with more information about our custom capabilities. avle
 (posted 2013-05-14 03:28:56.587) can you make a custom matched pair using two 2330-C lenses? please quote tcohen
 (posted 2013-05-15 12:50:00.0) Response from Tim at Thorlabs: Thank you for your inquiry. I will contact you directly to discuss your requirements. |
当社の高NAファイバ結合レンズペアは、半導体レーザからの出射光をマルチモードファイバに簡単にかつ効率よく入射するためにお使いいただけます。半導体レーザから出射される大きな広がり角を持つ光を高NAファイバに入射するため、このレンズペアは2枚のレンズで構成されています。レーザ側のレンズはNAが0.55、ファイバ側のレンズのNAは0.25です。また、600~1050 nmまたは1050~1700 nmのARコーティングが付いています。
このレンズペアは、事前にアライメントされており、半導体レーザ側にM9 x 0.5外ネジ付きの金属製筐体にマウントされています。取付けの際には、アダプタS1TM09を使用してこの筐体をSM1ネジに対応させることができます。このアダプタによって、当社のレンズチューブへの取付けが可能です。また、レンズペアを当社のフレクシャーステージ上に取り付けるにはRMS09をマウントHCS013と一緒にお使いいただけます。また、RMSネジアダプタを使って、レンズペアを当社のキネマティックマウントKM100Rに取り付けることもできます。
Specifications | ||
---|---|---|
Item # | C230220P-B | C230220P-C |
Numerical Aperture Laser Side | 0.55 | 0.55 |
Numerical Aperture Fiber Side | 0.25 | 0.25 |
Coating | B: 600 - 1050 nm | C: 1050 - 1700 nm |
Distance of Laser Focal Point from Housing Front | 2.900 mm | 2.900 mm |
Distance of Fiber Focal Point from Housing Front | 5.766 mm | 5.766 mm |
Housing Thread | M9 x 0.5 |
Posted Comments: | |
liz74
 (posted 2018-08-10 18:12:59.227) Hello, I would like to use this "Laser to High NA Fiber Coupling Pair" to couple 720nm and 1310nm lasers from diode facet into fibre, SM fibre would be the best. But when I check the C230220P-B product information, it says the design wavelength is 780nm. What dose the design wavelength mean, could I use this product to couple 720nm or 700nm laser from diode into a fibre. Looking forward to your reply. YLohia
 (posted 2018-09-17 09:47:43.0) Hello, thank you for contacting Thorlabs. The design wavelength of 780nm means that at 780nm you would get the optimum performance from the lens. Since the lens is made from a single material, the design is optimized for a specific wavelength. The performance at any other wavelength will be different from what is called out as the performance at the design wavelength. For fiber coupling applications, the lenses offer good performance well beyond their specific design wavelength. The lenses are coated to minimize the back reflections in the coating range specified. For specific performance it is always best to use the Zemax data to model in the specific application.
That being said, this lens is specified for use in the 650 - 1050nm wavelength range, which is fine for 720nm but less than ideal for 1310nm. The primary issue here would be loss due to the AR coating, which does not cover 1310nm. There will also be a noticeable focal length shift so the spot sizes of the two wavelengths will not be equal. For such applications, we typically recommend using mirrors due to their broadband operating range. lea.caddick
 (posted 2016-02-15 05:38:58.43) C230220P-C
Hello. Could you please confirm RoHS compliance for this item with hopefully a C of C?
Thank you.
Lea. besembeson
 (posted 2016-03-03 12:21:42.0) Response from Bweh at Thorlabs USA: Yes it is. The document can be found here: http://www.thorlabs.com/RoHS_cert.cfm?rohs=A%20(compliant%202011/65/EU)&pn=C230220P-C |
このレンズペアは、半導体レーザからの出射光をNA 0.16以上のファイバに入射するためにお使いいただけます。半導体レーザから出射される大きな広がり角を持つ光をマルチモードファイバに入射するため、このレンズペアは2枚のレンズで構成されています。レーザ側のレンズはNAが0.55、ファイバ側のレンズのNAは0.16です。高NAで焦点距離の短いレンズと、低NAで焦点距離の長いレンズを組み合わせることにより、焦点距離の比に応じて、発光部のNAを低減させることができます。同時に、発光部のサイズは、この比に逆比例して拡大します。また、600~1050 nmまたは 1050~1700 nmのARコーティングが付いています。
このレンズペアは、事前にアライメントされており、半導体レーザ側にM9 x 0.5外ネジ付きの金属製筐体にマウントされています。取付けの際には、アダプタS1TM09を使用してこの筐体をSM1ネジに対応させることができます。このアダプタによって、当社のレンズチューブへの取付けが可能です。また、レンズペアを当社のフレクシャ―ステージ上に取り付けるにはRMS09をマウントHCS013と一緒にお使いいただけます。また、RMSネジアダプタを使って、レンズペアを当社のキネマティックマウントKM100Rに取り付けることもできます。
Specifications | ||
---|---|---|
Item # | C230260P-B | C230260P-C |
Numerical Aperture Laser Side | 0.55 | 0.55 |
Numerical Aperture Fiber Side | 0.16 | 0.16 |
Coating | B: 600-1050 nm | C: 1050-1700 nm |
Distance of Laser Focal Point from Housing Front | 2.900 mm | 2.900 mm |
Distance of Fiber Focal Point from Housing Front | 10.510 mm | 10.510 mm |
Housing Thread | M9 x 0.5 |
Posted Comments: | |
No Comments Posted |