Ø38 mm(Ø1.5インチ)ポスト用キネマティックマウント
- Kinematic Mounts for Ø2" or Ø3" Mirrors
- Two 80 TPI Adjusters for ±3.5° Adjustment
- Clamp to Ø1.5" Posts
C1518
Ø3" Mirror Mount
C1517
Ø2" Mirror Mount
Back
C1517 with Mirror,
Post, and Clamping Fork
Front
Please Wait
Large Diameter Mirrors |
---|
Plano Broadband Dielectric Mirrors Plano Metallic Mirrors Concave Mirrors Ultrafast Mirrors CO2Laser Line Mirrors |
Ø1.5" Post Accessories |
---|
Construction Accessories |
V-Mounts |
Mounting Plates |
Brackets / Platforms |
Mirror Mounts |
特長
- 大径の光学素子を高剛性のØ38 mm(Ø1.5インチ)ポストに取り付け
- ロック可能な真ちゅうのブッシュによるスムーズで簡単な調整
- 2つの1/4"-80アクチュエータによる±3.5°のピッチ&ヨー調整
- 黒色アルマイト加工
- 光学素子の最小許容厚さ
- C1517/M:5.6 mm
- C1518/M:3.8 mm
こちらのポスト取り付け用キネマティックミラーマウントは大径の光学素子を取り付け可能です。C1517/MはØ50 mm~Ø50.8 mm(Ø2インチ)の光学素子、C1518/MはØ75 mm~Ø76.2 mm(Ø3インチ)の光学素子に対応しています。先端がナイロン製の止めネジで光学素子をマウントに固定します。どちらのマウントも、大径光学素子を支えられるように安定性を強化した強力ばね設計です。 背面のクランプ機構をØ38 mm(Ø1.5インチ)ポストの長さ方向に沿ってスライドさせることで高さを調整できます。 垂直方向の位置決め後、ハンドルを用いてクランプします。
これらのハンドルは脱着が可能です。ハンドルにはM6ネジ付きスタッドがあり、ハンドルを回転させるだけでポストに取り付けられます。内部の機構により、ハンドルの回転位置は、ねじを締めつけずに調整することができます。旧製品用には、簡単脱着ハンドル(型番C15QR//M)が別途ご購入いただけます。
Posted Comments: | |
kevin klees
 (posted 2020-03-13 12:58:10.07) I am going to use your PN C1517. But I am going to modify it (add some tapped holes) to hold my own "special" optics.
If you had a version of the C1517 where the movable plate with the counter-bore for the 2" OD mirror was replaced with a flat plate with a grid of 1/4-20 threaded holes I would use that instead.
Seems like a new movable plate without the counter-bore would give you a more "universal" product. YLohia
 (posted 2020-03-13 02:15:50.0) Hello, thank you for your feedback. Currently, we offer the C1511 1.5" post mounting clamp with 1/4-20 tapped holes on the front plate, which does not have the kinematic adjustability of the C1517. I have posted your request on our internal engineering forum for further consideration as a future product. |