Ø50.8 mm(Ø2インチ)アダプター、マウント無し光学素子用
- Mounting Solutions for Ø1" to Ø48 mm Optics
- Adapt Optics to Mounts with Either Ø2" Bore or Internal SM2 Threading
- Setscrew or Retaining Ring for Optic Retention
AD2
Ø1" Smooth Central Bore
Ø2" Smooth Outer Surface
SM2AD42
Internally M42.5 x 0.5 Threaded
Central Bore, Externally SM2 Threaded
SM2B2
Ø1.51" Smooth Central Bore,
Externally SM2 Threaded
AD2T
Internally SM1-Threaded
Central Bore, Ø2" Smooth
Outer Surface
Please Wait
Selection Guide | ||
---|---|---|
Optic Retention | Smooth 2" Outer Diameter | Externally SM2-Threaded Outer Surface |
Smooth Bore w/ Setscrew | Adapters for Ø1", Ø30 mm, or Ø1.5" Optics | Adapter for Ø1.5" Components |
Close Approach Dual Bore w/ Setscrew | Adapter for Ø1" Optics | - |
Internal Threads w/ Retaining Rings | Adapter for Ø1" Optics | Adapters for Optics between Ø30 mm and Ø48 mm |
Smooth Bore w/ Setscrew | Adapter for Ø1.2" Components |
当社では、Ø50.8 mm(Ø2インチ)のオプトメカニクスシステム (光学マウントやレンズチューブなど)に、直径の異なる光学素子を簡単に組み込むための、マウント無し光学素子用Ø50.8 mm(Ø2インチ)アダプタをご用意しています(右表をご覧ください)。このページのネジ切り無しのアダプタは、Ø25.4 mm(1インチ)、Ø30 mm、Ø38 mm(1.5インチ)の光学素子を2本の接触線で固定できる2重穴構造になっています。中心穴に内ネジの付いたSM2外ネジ付きアダプタには、Ø30 mm~Ø48 mmの光学素子を取り付けられます。また、Ø25 mm~Ø25.4 mm光学素子用のSM1内ネジ付きØ50.8 mm(Ø2インチ)アダプタ、および中心穴に内ネジの無いSM2外ネジ付きアダプタもご用意しています。
当社では、マウント無し光学素子用のØ25.4 mm(Ø1インチ)アダプタもご用意しています。
Posted Comments: | |
jim.guenter
 (posted 2017-02-16 15:28:56.237) Unfortunately my optic is 28 mm diameter, too large for SM1, but 2 mm too small for your smallest SM2 adapter. Any chance you have something smaller, or a blank that we could put our own hole in for the optic? Ultimately need to mate to an SM1 tube system on both sides of the lens, but we can use adapters with an SM2 section if necessary. tfrisch
 (posted 2017-02-20 09:43:16.0) Hello, thank you for contacting Thorlabs. I will reach out to you about our Self Centering lens mounts like SCL60C. You may be able to use that with adapters to the SM1 system. ludoangot
 (posted 2016-01-29 11:54:57.927) Your AD2-30 has the 30mm smooth bore I am looking for but no external SM2 thread. Do you have such an adapter (1.18"/ 30mm internal smooth bore and SM2 ext. thread)? Or could you please suggest a solution to mount a 30mm outer diameter objective lens into your SM2 tubes? My exact purpose is to mount said objective lens into your XY translation mount ref. CXY2. jlow
 (posted 2016-02-01 09:33:02.0) Response from Jeremy at Thorlabs: Once the optic is mounted in the AD2-30, you can put that into a SM2 lens tube such as SM2L05, which can then be attached for the CXY2. If your optic thickness is <7.1mm, then you could also mount your optic into the SM2AD30, which can be attached to the CXY2. f.niewoehner
 (posted 2014-05-04 07:20:31.103) Dear sir or madame,
I have a question to you. Do you offer any mounts for your 2'' lens tubes to fix your square Diffraction Gratings inside of it?
Thanks in advance.
Sincerely,
Frauke Niewöhner
Friedrich-Alexander university Erlangen-Nuremberg cdaly
 (posted 2014-05-08 03:38:11.0) Response from Chris at Thorlabs: There's no direct adapter, but a few can be used The grating can be mounted in a KGM20, KGM40, or KGM60, depending on the size. Each would then provide a 1" outer bore diameter surface which can be converted to an SM1 thread using an SM1P1 adapter and then to an SM2 thread using an SM2A6 adapter. cbrideau
 (posted 2013-04-05 14:27:36.547) Picture caption at top of page has SM2AB2 as part number, but in list below shows it as SM2B2. sharrell
 (posted 2013-04-05 14:44:00.0) Response from Sean at Thorlabs: Thank you for pointing out our error. We are working on fixing the caption. |
Click to Enlarge
アダプタAD2を使用してØ25.4 mm(Ø1インチ)光学素子を取り付けたØ50.8 mm(Ø2インチ)ミラーマウントKM200
Item # | Counterbore | ODa | Optic Thickness (Min)b | Tc |
---|---|---|---|---|
AD2 | Ø1.00" (Ø25.4 mm) | Ø2.00" | 0.22" (5.6 mm) | 0.25" (6.4 mm) |
AD2-30 | Ø30 mm (Ø1.18") | Ø2.00" | 0.22" (5.6 mm) | 0.25" (6.4 mm) |
AD2-1.5 | Ø1.51" (Ø38 mm) | Ø2.00" | 0.27" (6.9 mm) | 0.33" (8.4 mm) |
このネジ無しアダプタの外径はØ50.8 mm(Ø2インチ)で、外ネジは付いていません。また、光学素子を2本の接触線で固定できる2重ザグリ穴構造になっています。AD2にはØ25.4 mm(Ø1インチ)用のザグリ穴、AD2-30にはØ30 mm用のザグリ穴、AD2-1.5にはØ38 mm(Ø1.51インチ)用のザグリ穴があります。光学素子は、2本の接触線に対して、ナイロンチップ付き止めネジ(セットスクリュ)で固定されます。
Click to Enlarge
アダプタAD2-CAにØ25.4 mm(Ø1インチ)光学素子を取付けて、近接するビームを分離することが可能
AD2-CAの外径はØ50.8 mm(Ø2インチ)で、Ø25.4 mm(Ø1インチ)の穴が2つ開いています。1つの穴は光学素子の取付け用で、そこにナイロンチップ付き#8-32止めネジ(セットスクリュ)で光学素子を固定します。このアダプタは、Ø25 mm~Ø25.4 mm(Ø1インチ)の円形光学素子を取付けて、近接するビームを分離して小さな角度で後方反射させるのに適しています。D型ミラーを取り付けたい場合には、当社のD型ミラー用マウントのご使用をお勧めします。
Click to Enlarge
アダプタAD2Tを用いてØ50.8 mm(Ø2インチ)ミラーマウントKM200に取り付けられたSM1ネジ付きレンズチューブ内のØ25.4 mm(Ø1インチ)光学素子
アダプタAD2TにはSM1内ネジが付いており、付属の固定リングSM1RRを用いて、厚さ9.4 mmまでのマウント無しØ25 mm~Ø25.4 mm(Ø1インチ)光学素子を保持できますb。 また、このアダプタは、SM2レンズチューブ内に固定リングで固定することができます。AD2Tの外周にはネジが切られていないため、特にØ25.4 mm(Ø1インチ)の波長板をØ50.8 mm(Ø2インチ)マウントに取り付けるのに適しています。
Item # | CA | OD | Optic Thickness (Max) | Internal Thread | Retaining Ring | Spanner Wrench |
---|---|---|---|---|---|---|
AD2T | Ø23.0 mma | Ø2" | 0.37" (9.4 mm)b | SM1 (1.035"-40) | SM1RR | SPW801 or SPW602 |
これらのアダプタにはSM2外ネジが付いており、中心には内ネジの無い貫通穴があります。アダプタSM2B2には0.05インチ六角止めネジ(セットスクリュ)が付いており、これでØ38.1 mm(Ø1.5インチ)のコンポーネントを固定します。一方、アダプタSM2A21には2 mmナイロンチップ付き六角止めネジが付いており、これでØ30.5 mm(Ø1.2インチ)のコンポーネントを固定します。このアダプタは50.8 mmの外径も有しています。そのため、SM2A21は、右の写真のようにKM200などのØ50.8 mm(Ø2インチ)光学素子用マウントに取付けることができます。いずれのマウントにもSM2外ネジが付いており、当社のSM2レンズチューブやSM2シリーズマウントに取り付けられます。
Item # | Bore | OD | Optic Thickness (Max) | External Thread |
---|---|---|---|---|
SM2A21 | Ø1.20" (Ø30.5 mm) | Ø2.00" (Ø50.8 mm) | N/Aa | SM2 (2.035"-40) |
SM2B2 | Ø1.51" (Ø38.2 mm) | Ø2.20" (Ø55.9 mm) | N/Aa | SM2 (2.035"-40) |
このSM2外ネジ付きアダプタは、当社のØ50.8 mm(Ø2インチ)レンズチューブやØ50.8 mm(Ø2インチ)光学マウントなどSM2内ネジ付きの筐体に取り付けられたØ30 mm~Ø48 mmの光学素子のマウントとしてお使いいただけます。 各マウントにはSM2外ネジが付いているほか、中央の内孔には内ネジが付いています(ネジの仕様については下表参照)。 アダプタに光学素子を固定するために、固定リングが2個付属しています。
Item # | Optic | CAa | Optic Thickness (Max)b | Internal Thread | External Thread | Retaining Ring | Spanner Wrench |
---|---|---|---|---|---|---|---|
SM2AD30 | Ø30 mm | Ø1.10" (Ø27.9 mm) | 0.28" (7.1 mm) | M30.5 x 0.5 | SM2 (2.035"-40) | SM30RR | SPW801 |
SM2AD31 | Ø31 mm | Ø1.14" (Ø29.0 mm) | 0.28" (7.1 mm) | M31.5 x 0.5 | SM2 (2.035"-40) | SM31RR | |
SM2AD32 | Ø32 mm | Ø1.18" (Ø30.0 mm) | 0.28" (7.1 mm) | M32.5 x 0.5 | SM2 (2.035"-40) | SM32RR | |
SM2AD33 | Ø33 mm | Ø1.22" (Ø31.0 mm) | 0.28" (7.1 mm) | M33.5 x 0.5 | SM2 (2.035"-40) | SM33RR | |
SM2AD34 | Ø34 mm | Ø1.26" (Ø32.0 mm) | 0.28" (7.1 mm) | M34.5 x 0.5 | SM2 (2.035"-40) | SM34RR | |
SM2AD35 | Ø35 mm | Ø1.30" (Ø33.0 mm) | 0.28" (7.1 mm) | M35.5 x 0.5 | SM2 (2.035"-40) | SM35RR | |
SM2AD36 | Ø36 mm | Ø1.34" (Ø34.0 mm) | 0.28" (7.1 mm) | M36.5 x 0.5 | SM2 (2.035"-40) | SM36RR | |
SM2AD37 | Ø37 mm | Ø1.38" (Ø35.0 mm) | 0.28" (7.1 mm) | M37.5 x 0.5 | SM2 (2.035"-40) | SM37RR | |
SM2AD1.5 | Ø1.5" | Ø1.37" (Ø34.8 mm) | 0.36" (9.1 mm) | 1.535"-40 | SM2 (2.035"-40) | SM1.5RR | SPW608 or SPW801 |
SM2AD39 | Ø39 mm | Ø1.44" (Ø36.5 mm) | 0.36" (9.1 mm) | M39.5 x 0.5 | SM2 (2.035"-40) | SM39RR | SPW801 |
SM2AD40 | Ø40 mm | Ø1.47" (Ø37.5 mm) | 0.36" (9.1 mm) | M40.5 x 0.5 | SM2 (2.035"-40) | SM40RR | |
SM2AD41 | Ø41 mm | Ø1.51" (Ø38.5 mm) | 0.36" (9.1 mm) | M41.5 x 0.5 | SM2 (2.035"-40) | SM41RR | |
SM2AD42 | Ø42 mm | Ø1.55" (Ø39.5 mm) | 0.36" (9.1 mm) | M42.5 x 0.5 | SM2 (2.035"-40) | SM42RR | |
SM2AD43 | Ø43 mm | Ø1.59" (Ø40.5 mm) | 0.36" (9.1 mm) | M43.5 x 0.5 | SM2 (2.035"-40) | SM43RR | |
SM2AD44 | Ø44 mm | Ø1.63" (Ø41.5 mm) | 0.36" (9.1 mm) | M44.5 x 0.5 | SM2 (2.035"-40) | SM44RR | |
SM2AD45 | Ø45 mm | Ø1.67" (Ø42.4 mm) | 0.36" (9.1 mm) | M45.5 x 0.5 | SM2 (2.035"-40) | SM45RR | |
SM2AD46 | Ø46 mm | Ø1.71" (Ø43.5 mm) | 0.36" (9.1 mm) | M46.5 x 0.5 | SM2 (2.035"-40) | SM46RR | |
SM2AD47 | Ø47 mm | Ø1.75" (Ø44.5 mm) | 0.36" (9.1 mm) | M47.5 x 0.5 | SM2 (2.035"-40) | SM47RR | |
SM2AD48 | Ø48 mm | Ø1.79" (Ø45.5 mm) | 0.36" (9.1 mm) | M48.5 x 0.5 | SM2 (2.035"-40) | SM48RR |