ガラスセル用ヒーター
- Heaters for Glass Cells up to Ø25 mm
- Heating Capacity up to 15 W
- Integrated Thermistors for Closed-Loop Operation
- Compatible with Thorlabs' TC300B Heater and TEC Temperature Controller
GCH25-75
Heater Assembly for
Ø9, Ø19, or Ø25 mm Glass Cells,
30 mm Cage System Compatible
GCH25R
Cap Heater for
Ø25 mm Glass Cells
TLK-H
1" x 3" Flexible Foil Heater
for Ø25 mm Glass Cells
Please Wait
特長
- ガラスセル内のガスの加熱用ヒータ
- 閉ループ温度制御用にサーミスタを内蔵
- Ø9 mm、Ø19 mmまたはØ25 mmガラスセル用ヒータ、30 mmケージシステムに取付け可能
- Ø25 mmガラスセル用キャップヒータ、止めネジ(セットスクリュ)付き
- 25.4 mm × 76.2 mmホイルヒータの裏面にはØ12.7 mmおよびØ25 mmガラスセルに巻き付けるための粘着剤付き
当社ではガラスセル用に様々なヒータをご用意しております。GCH25-75はヒータ容量15 Wで、当社の30 mmケージシステムにも取り付け可能です。キャップヒータGCH25Rは、当社のØ25 mmのガラスセルの端部に取り付けられるように設計されています。ホイル型の抵抗ヒータはガラスセルまたはレンズチューブに取り付けるために裏面に粘着剤が付いています。どちらのヒータも当社のヒーター温度コントローラTC300Bと旧製品のTC300に対応します。
温度コントローラGCH25-75
6ピンHiroseコネクタ(オス)付きケーブルTC200CAB10
Pin | Assignment |
---|---|
1 | Heater Input |
2 | Heater Input Return |
3 | Reserved (Do Not Connect to This Pin) |
4 | Thermistor Input (+) |
5 | Thermistor Input Ground |
6 | Reserved (Do Not Connect to This Pin) |
サーミスタおよび6ピンHiroseコネクタ(メス)付きヒータTLK-H
Pin | Assignment |
---|---|
1 | Heatera |
2 | Heatera |
3 | Not Connected |
4 | Thermistora |
5 | Thermistora |
6 | Not Connected |
Click to Enlarge
GCH25-75 Packaging
Item # | % Weight Reduction |
CO2-Equivalent Reductiona |
---|---|---|
GCH25-75 | 21.04% | 1.52 kg |
Smart Pack
- Reduce Weight of Packaging Materials
- Increase Usage of Recyclable Packing Materials
- Improve Packing Integrity
- Decrease Shipping Costs
Thorlabs' Smart Pack Initiative is aimed at waste minimization while still maintaining adequate protection for our products. By eliminating any unnecessary packaging, implementing packaging design changes, and utilizing eco-friendly packaging materials for our customers when possible, this initiative seeks to improve the environmental impact of our product packaging. Products listed above are now shipped in re-engineered packaging that minimizes the weight and the use of non-recyclable materials.b As we move through our product line, we will indicate re-engineered packages with our Smart Pack logo.
Posted Comments: | |
Maria Romodina
 (posted 2024-02-13 09:15:39.637) Dear Thorlabs team,
On the website the temperature limit for the GCH25-75 is 50°C, but on the unit it says 80°C maximum. Which recommendation should I follow and why is there such a big difference?
Kind regards,
Maria cdolbashian
 (posted 2024-02-19 10:07:56.0) Thank you for reaching out to us with this inquiry. Since this device would be used in a heating setup, with our heater controller, the 50°C refers to the max temp you should operate this device, while the 80°C refers to the max setpoint which would be set in the controller's control panel (TC300 at the time of posting this). I have contacted you directly to expound on this further. |
Specificationsa | |
---|---|
Heater Power | 15 W (Max) @ 24 V ± 20% 3.8 W @ 12 V 0.90 W @ 6 V |
Max Temperature | 50 °C |
Input Voltage | 24 VDC (Max) |
Heater Resistance | 38.4 Ω (Typ.) |
Connector Type | 6-Pin Hirose HR10A-7R-6S |
Cable Length | 3 m (10 ft) |
Simplified Drawing | |
Compatible Controller | TC300Bb |
- Ø25 mmガラスセルに取り付け可能
- Ø9 mmおよびØ19 mmガラスセルへの取付け用アダプタ
- 各素子の加熱電力は15 W(各アセンブリには加熱素子が2つ付いています)、サーミスタ付き
- ヒーター温度コントローラTC300Bと組み合わせて使用できるよう、Hirose製コネクタの付いたケーブルが付属
- 30 mmケージシステムに取付け可能
ガラスセル用ヒータGCH25-75は、内蔵の2つのヒータ素子を使用してガラスセルの温度を50 °Cまで上げることができます(室温が25 °Cの場合で、ヒーターユニットによって制限されます)。温度はMinco社の薄型フィルムセンサを使用してモニタされています。Ø9 mmおよびØ19 mmセル用のアダプターリングが付属します。Ø25 mmセルにはアダプタを使用せずにヒータを取り付けられます。ヒータにはØ6 mmケージロッドが使用されており、当社の30 mmケージシステムにも取り付けられます。
当社のヒーター温度コントローラTC300Bおよび旧製品のTC300(いずれも別売り)は、このヒータの温度制御に適したコントローラです。ヒータには、温度コントローラの2つの出力端子に直接接続できる2本のHiroseケーブルが付属します。2つの出力端子を使用することで、1つのコントローラでこのヒータのすべての機能を操作できます。
Specifications | |
---|---|
Heater Power | 10 W (Max) ± 20% @ 24 V |
Max Temperature | 50 °Ca |
Input Voltage | 24 VDC (Max) |
Heater Resistance | 50 Ω ± 10% |
Connector Type | Bare Wire Leads |
Lead Length | 305 mm (12.0") |
Lead Length Tolerance | +10/-0.0 mm (+0.4/-0.0") |
Simplified Drawing | |
Compatible Controller | TC300Bb |
- Ø25 mmガラスセルに取り付け可能
- 有効径:20.0 mm
- 加熱電力10 W、サーミスタ内蔵
- ナイロンチップ付きの2.0 mm六角止めネジ(セットスクリュ)で取り付け
キャップヒータGCH25Rは、Ø25 mmガラスセル用に設計されています。この中には金属セラミックヒータ(10 Wリング状ヒータ、10 kΩサーミスタ付き)が内蔵されています。アルミニウム製の筐体は2重穴構造になっており、ナイロンチップ付き止めネジ(セットスクリュ)でセルの端部に取り付けます。2つのキャップヒータ(別売り)をガラスセルの両端に取り付けることもできます。
このヒータには、お手持ちのコネクタに接続できるように先端が裸のリード線が付いています。赤いリード線は抵抗ヒータ素子に、白いリード線はサーミスタに接続されています。GCH25Rは、HiroseケーブルTC200CAB10を用いてヒーター温度コントローラTC300Bまたは旧製品のTC300に接続することもできます(どちらも別売りです)。その場合は、Hiroseケーブルを切断し、ワイヤを露出させる必要があります。
Item # | HT10K | TLK-H |
---|---|---|
Heater Power | 10 W/in2 (0.016 W/mm2) @ 70 °C | |
Heater Resistance | 19.7 Ωa | |
Sensor Type | NTC10K Thermistor | |
Size | 1" x 3" (25.4 mm × 76.2 mm) | |
Effective Heating Area | 2.23 in2 (1438.7 mm2) | |
Minimum Bend Radius | 0.5" (12.7 mm) in Thermistor Area, 0.030" (0.8 mm) in All Other Areas | |
Temperature Range | -32 to 100 °C (-26 to 212 °F) | |
Connector Type | Bare Wire Leads | 6-Pin Hirose HR10A-7R-6S |
Simplified Drawing and Pin Diagram | ||
Compatible Controller | TC300Bb |
- 加熱面積25.4 mm × 76.2 mm、ガラスセルまたはレンズチューブ用
- 裏側の粘着剤により簡単に取付け可能
- ヒータの発熱密度0.016 W/mm2、サーミスタ内蔵
- ヒータTLK-Hは、ヒーター温度コントローラTC300Bとの接続用にHirose製コネクタ付き
25.4 mm x 76.2 mmのホイルヒータ素子は多くの実験の用途でご使用いただけます。サーミスタを内蔵しているため、閉ループ温度制御が可能です。また裏面にはアクリル系感圧粘着剤が付いており、取り付けが容易です。どちらの製品もカプトン(ポリイミド)ヒータ素子と、10 kΩ NTCサーミスタを使用しています。
HT10Kには、お手持ちのコネクタに接続できるように、先端が裸のリード線が付いています。一方、TLK-Hは6ピンHirose製コネクタ付きケーブルTC200CAB10(別売り)を使用してヒータ温度コントローラTC300Bおよび旧製品のTC300に接続できるため、ホイルヒータとコントローラ間の配線が省略できます。
どちらのホイルヒータも、右の写真のようにレンズチューブを加熱するなど、様々な使い方ができます。この写真のような使い方をする場合は、低熱伝導性アダプタを用いることでレンズチューブと他のシステムとの熱的絶縁を高めることができます。