アルミニウム製ブレッドボード、厚さ55 mm、剛性強化型
- All-Aluminum Construction Minimizes Thermal Instabilities
- High Strength-to-Weight Ratio
- Useful for Applications Demanding a
Totally Nonmagnetic Structure
PBG12118
18" x 24" UltraLight™
Optical Breadboard
Cutaway Showing the Internal Honeycomb Structure
Please Wait
Key Specificationsa | ||
---|---|---|
Construction | ||
Breadboard Thickness | 55 mm (2.2") | |
Top Skin Flatness | ±0.15 mm (±0.006") Over Any 0.3 m2 | |
Construction | Double-Plate, Single-Honeycomb Core, Athermalized Aluminum Design | |
Mounting Holes | Imperial | Metric |
Threads and Spacing | 1/4"-20 Tapped Holes on 1" Centers | M6 Tapped Holes on 25 mm Centers |
Distance from Edge to First Holes | 1.0" from Table Edge on all Sides | 25.0 mm from Table Edge on all Sides |
Maximum Screw Depth | 6 mm (0.24") from Top Surface |
特長
- 厚さ:55 mm (2.2インチ)
- オールアルミニウム構造によりCTEを整合し、熱による影響を低減
- 幅広いサイズ(W x L)をご用意:
- ミリ規格: 300 mm x 600 mm~1250 mm x 1800 mm
- 厚さ12.7 mm(0.5インチ)のアルミニウム製ブレッドボードに比べて高い剛性(詳細は「コンストラクション」タブ参照)
- 黒の艶消し塗装の表面により反射および後方散乱が低減
- 高密度のハニカムコアによる優れた静的および動的剛性
- カスタムサイズもご提供可能(詳細は当社までお問い合わせください)
UltraLight™ハニカムブレッドボードは強度重量比が高く、オールアルミニウムの構造になっています。あらゆる部分にアルミニウムを使用しているため熱膨張係数(CTE)が均一で、熱膨張に伴う不安定さを最小限に抑えています。これらのブレッドボードは、可搬性と動的剛性が重要な光学系のセットアップに適しています。一般に、完全な非磁性面が必要とされる用途や、アルミニウム、スチールまたは花崗岩製のブレッドボードの代替品として使用されています。
光学ブレッドボードの選択
アルミニウム製の光学ブレッドボードを選ぶ際は、剛性が重要な検討要素になります。当社では、 高剛性と剛性強化型の2種類のアルミニウム製光学ブレッドボードをご用意しております。荷重負荷時のたわみは、よく厚さと関連付けて考えられますが、実際にはボードの剛性がたわみを決定します。
剛性が高くなると、荷重や力が負荷されてもブレッドボードが曲がりにくくなります。したがって、高剛性のブレッドボードの中心部に高荷重を負荷すると、剛性強化型のブレッドボードに同じ荷重を負荷した場合に比べてたわみが大きくなります。このたわみにより、ブレッドボードの両端に乗せた2つの部品の間にミスアライメントが生じます。このことは、例えば直線の光軸を保持したまま、光学系のセットアップをブレッドボード上で移動させる必要のある実験を行う場合に特に重要です。
当社では、優れた剛性とダンピング特性を有するNexus® スチールハニカム製ブレッドボードを豊富に取り揃えております。当社の異なる種類のブレッドボードの比較については、「ブレッドボードセレクションガイド」タブをご覧ください。
フレームおよび除振についてのオプション
当社では、数多くのブレッドボード用の支柱をご用意しております。一般的なブレッドボード用には、固定式支柱フレームや、パッシブ型または自動調整機能付きアクティブ型の除振フレームがございます。ブレッドボードをテーブル上面に取り付ける際に使用するパッシブ型および電子制御型の除振脚もご用意しております。
Specifications | ||
---|---|---|
Construction | ||
Breadboard Thickness | 55 mm (2.2") | |
Top Skin Flatness | ±0.15 mm (± 0.006") Over Any 0.3 m2 | |
Construction | Double-Plate, Single-Honeycomb Core, Athermalized Aluminum Design | |
Top Plate | 6 mm Thick Aluminum | |
Bottom Plate | 3 mm Thick Aluminum | |
Core | High-Density Plated Aluminum Honeycomb | |
Sides | Black Laminated Aluminum Sides, Slightly Inset | |
Finish | Matte Black | |
Mounting Holes | Imperial | Metric |
Threads and Spacing | 1/4"-20 Tapped Holes, Not Sealed, on 1" Centers | M6 Tapped Holes, Not Sealed, on 25 mm Centers |
Distance from Edge to First Holes | 1.0" on all Sides | 25.0 mm on all Sides |
Maximum Screw Depth | 6 mm from Top Surface |
Imperial Breadboard Dimensions and Weights | |||||
---|---|---|---|---|---|
Item # | Dimensions (L x W x H) | Unpackaged Mass | Unpackaged Weight | Packaged Shipping Massa | Packaged Shipping Weighta |
PBG12102 | 12" x 24" x 2.2" | 6.00 kg | 13.00 lbs | 12.00 kg | 26.40 lbs |
PBG12103 | 12" x 36" x 2.2" | 8.00 kg | 18.00 lbs | 17.00 kg | 37.40 lbs |
PBG12118 | 18" x 24" x 2.2" | 8.00 kg | 17.64 lbs | 14.32 kg | 31.50 lbs |
PBG12105 | 24"' x 24" x 2.2" | 12.00 kg | 27.00 lbs | 20.96 kg | 51.41 lbs |
PBG12106 | 24" x 36" x 2.2" | 16.00 kg | 35.00 lbs | 29.00 kg | 63.80 lbs |
PBG12108 | 24" x 60" x 2.2" | 26.00 kg | 57.00 lbs | 43.00 kg | 94.60 lbs |
PBG12110 | 30" x 36" x 2.2" | 21.00 kg | 46.30 lbs | 35.00 kg | 68.39 lbs |
PBG12111 | 30" x 48" x 2.2" | 27.00 kg | 60.00 lbs | 46.00 kg | 96.80 lbs |
PBG12113 | 36" x 48" x 2.2" | 32.00 kg | 71.00 lbs | 54.00 kg | 118.80 lbs |
PBG12114 | 36" x 60" x 2.2" | 39.00 kg | 86.00 lbs | 64.00 kg | 140.80 lbs |
Metric Breadboard Dimensions and Weights | |||||
---|---|---|---|---|---|
Item # | Dimensions (L x W x H) | Unpackaged Mass | Unpackaged Weight | Packaged Shipping Massa | Packaged Shipping Weighta |
PBG52502 | 300 x 600 x 55 mm | 6.00 kg | 13.00 lbs | 12.00 kg | 26.40 lbs |
PBG52503 | 300 x 900 x 55 mm | 8.00 kg | 18.00 lbs | 16.00 kg | 35.20 lbs |
PBG52522 | 450 x 600 x 55 mm | 8.20 kg | 18.00 lbs | 15.34 kg | 33.75 lbs |
PBG52505 | 600 x 600 x 55 mm | 11.00 kg | 24.00 lbs | 20.00 kg | 44.00 lbs |
PBG52506 | 600 x 900 x 55 mm | 16.00 kg | 35.00 lbs | 28.00 kg | 60.00 lbs |
PBG52508 | 600 x 1500 x 55 mm | 27.00 kg | 60.00 lbs | 44.00 kg | 94.60 lbs |
PBG52510 | 750 x 900 x 55 mm | 20.00 kg | 44.00 lbs | 36.00 kg | 79.37 lbs |
PBG52511 | 750 x 1200 x 55 mm | 26.50 kg | 58.42 lbs | 43.00 kg | 103.62 lbs |
PBG52513 | 900 x 1200 x 55 mm | 27.00 kg | 59.00 lbs | 51.00 kg | 112.20 lbs |
PBG52514 | 900 x 1500 x 55 mm | 39.50 kg | 87.08 lbs | 63.00 kg | 140.80 lbs |
UltraLight™ 光学ブレッドボードは、高い強度対重量比と優れた温度安定性により、移動の容易さと動的剛性が重要となる光学系のセットアップに適しています。
ブレッドボードが原因の動きを抑制
UltraLightTM シリーズは、2枚の板とシングルハニカムコアを有し、高い剛性と動的剛性のある製品です。上面板は6 mm厚のアルミニウム製で、その下にアルミニウム製のハニカム構造と3 mm厚のアルミニウム製の下面板が層を成します。中心部分にあるハニカムコアは、精密加工されたアルミニウム帯を高張力のエポキシ製接着剤で接合して製造されています。
優れた表面平坦度
多くの実験セットアップで、ブレッドボードの平坦度は非常に重要です。平坦でない部分があると、ブレッドボードの高さが変わるためにコンポーネントを再調整する必要があり、コンポーネントが「ぐらつく」可能性があります。当社のブレッドボードは、製造過程で特に優れた平坦度を維持するために使われた高精度のアルミニウム製プレートによって、比類のない平坦度を有しています。独自のサーマルボンディング処理により、製造過程で応力が生じず、上面板の平坦度が保たれています。
アサーマル設計
当社のブレッドボードでは、上面と下面に、整合したアルミニウムを使用しています。独自のアサーマル設計で、温度変化による板面の反りを防ぎます。
Posted Comments: | |
user
 (posted 2024-07-09 10:39:46.697) For PBG 52508, the max screw depth is said to be 6mm on the top surface material. Is this 6mm the max thread engagement or the max distance the screw can go down to? The Newport IG 30x60-2 has around 19 mm hole depth and 3.4 mm thread engagement. I would like to have a clarification on this please. Thank you. cstroud
 (posted 2024-07-15 11:10:48.0) Thanks for reaching out. The 6mm spec is referring to both the maximum hole depth and the thread engagement. The threads are only drilled into the top skin of the PBG breadboards, which are 6mm thick. I will contact you directly to discuss this further. user
 (posted 2024-05-27 14:26:23.12) Hello,
I would like to use this breadboard to place on top of an optical table with 4 support posts. On top of the breadboard, I want to place a laser that weighs 59 kg. Do you think it can perform well for this weight?
Best regards,
Roberto do'neill
 (posted 2024-06-03 08:52:58.0) Thank you for your comment. It is unlikely that you will experience any issues with ~60kg with any of these breadboards with regards to load capacity, it is likely the post will be an issue before the board. I will reach out to you directly to discuss your application in more detail. Michael Strotkamp
 (posted 2024-01-11 10:22:50.0) The painting of the plates should be replaced by anodization (at least as an option) to prevent outgassing close the optics.
Especially for the customized breadboards that would be a great product enhancement. do'neill
 (posted 2024-01-18 08:35:10.0) Thank you for your feedback. There is currently an active project on this and we are working on replacing this with anodised version in the near future. gking
 (posted 2017-05-16 14:59:25.343) Would it be possible to get a custom 1000x1000mm breadboard?
Would the price be considerably different from say a 900x1200mm?
What would the delivery time be approximately? bwood
 (posted 2017-05-18 09:40:05.0) Response from Ben at Thorlabs: Thank you for your feedback. We are able to make a wide array of custom breadboards and tables, and we will be in contact shortly with a quote for this custom breadboard. user
 (posted 2015-04-09 15:50:12.95) Is there a special reason why the aluminum honeycomb breadboards are painted instead of anodized? We would prefer anodized breadboards because of the better surface axel.wiegmann
 (posted 2013-12-11 10:48:55.673) Is it possible to use the breadboard upside down with the mounting holes to the floor?
We want to rest an interferometer (weight about 60kg) on the side without mounting holes and use the side with mounting holes to fix the breadboard on a translation axis. msoulby
 (posted 2013-12-11 11:44:37.0) Response from Mike at Thorlabs: Yes it is entirely possible to use this breadboard upside down. However if nessary we can also provide you with a customised breadboard which will have no holes at all. I have contacted you directly to see if this might be a more suitable option. bdada
 (posted 2012-03-13 11:57:00.0) Response from Buki at Thorlabs to makarov:
Thank you for using our feedback forum. Yes, the finish is black paint. It is not anodized. Please contact techsupport@thorlabs.com if you have any questions. makarov
 (posted 2012-03-12 17:18:04.0) What is the surface finish? Is it painted black, not anodized? |
Breadboards | Nexus, Optimized Damping | Intrinsically Damped | Aluminum Honeycomb | Stainless Steel | Solid Aluminum |
---|---|---|---|---|---|
Construction | |||||
Breadboard Thickness | 60 mm (2.4") 110 mm (4.3") | 58 mm (2.28") | 25 mm (0.98") 55 mm (2.2") | 12.7 mm (0.5") | 7.0 mm (0.28") 9.5 mm (0.375") 12.7 mm (0.5") 19.05 mm (0.75") |
Working Surface | 4003 Grade Stainless Steel or 304L Grade Nonmagnetic Steel Top Plate | 4003 Grade Stainless Steel Top Plate | Aluminum | 416 Grade Stainless Steel | Solid Aluminum Anodized or Unanodized |
Top Skin | 5 mm (0.20") | 5 mm (0.20") | 6 mm (0.24") | N/A | N/A |
Bottom Skin | 5 mm (0.20") | 3 mm (0.12") | 3 mm (0.12") | N/A | N/A |
Core Design | High-Density Plated Steel Honeycomb, 0.26 mm Thick | High-Density Plated Aluminum Honeycomb | N/A | N/A | |
Side Panels | Rigid Steel Box Section | Unplasticized Polyvinyl Chloride (uPVC) | Black Laminated Aluminum Sides | N/A | N/A |
Ferromagnetism | Magnetic or Non-Magnetic Options | Magnetic | Non-Magnetic | Magnetic | Non-Magnetic |
Sealed Holes | Sealed (25 mm Depth) or Non-Sealed Options | Non-Sealed | N/A | N/A | |
Thread Options | 1/4"-20 (M6) Tapped Holes | 1/4"-20 (M6) Tapped Holes | 1/4"-20 (M6) Tapped Holes | 1/4"-20 (M6), 4-40 (M3), or 8-32 (M3) and 1/4"-20 (M6) Tapped Holes | |
Spacing | 1" (25 mm) Centers | 1" (25 mm) Centers | 1" (25 mm) Centers | 1" (25 mm) Centers or 0.5" (12.7 mm) Centers | |
Distance from Edge to First Holes | 0.5" (12.5 mm) on all Sides | 0.5" (12.5 mm) or 1.0" (25 mm) on all Sides | 0.5" (12.5 mm) on all Sides | 0.5" (12.5 mm) on all Sides | |
Performancea | |||||
Damping | N/A | N/A | |||
Stiffness | 60 mm (2.4") Thick | 58 mm (2.28") Thick | 25 mm (0.98") Thick | 12.7 mm (0.5") Thick | 7.0 mm (0.28") Thick |
110 mm (4.3") Thick | 55 mm (2.2") Thick | 19.05 mm (0.75") Thick |
光学ブレッドボードセレクションガイド
下記のセレクションガイドでは、当社のハニカム型およびソリッドタイプのアルミニウム製のブレッドボードをサイズごとにリストアップしています。まず、お探しのブレッドボードの幅と長さを見つけ、次にタイプをお選びください。それぞれの表は、ヘッダにあるMore [+] をクリックすると広がります。
当社では様々な種類のブレッドボードをご提供しております。冷却が必要な用途向けには、アルミニウム製の水冷式ブレッドボードをいくつかご用意しております。また、温度制御機能付きミニシリーズブレッドボードは規模の小さい用途向けです。手動制御のステージとして、アルマイト加工アルミニウム製の大型移動ステージや回転ブレッドボードをご用意しています。また、顕微鏡用途に適した製品として、手動式または電動式可動型取付けプラットフォームもございます。
Metric Optical Breadboard Size Options | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Width | Length | Honeycomb | Stainless Steel | Solid Aluminuma | ||||||
Nexus (60 mm Thick)b | Nexus (110 mm Thick)b | Intrinsically Damped (58 mm Thick) | Aluminum (25 mm Thick) | Aluminum (55 mm Thick) | Standard | Double Density | High Density |
Imperial Optical Breadboard Size Options | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Width | Length | Honeycomb | Stainless Steel | Solid Aluminuma | ||||||
Nexus (60 mm Thick)b | Nexus (110 mm Thick)b | Intrinsically Damped (58 mm Thick) | Aluminum (25 mm Thick) | Aluminum (55 mm Thick) | Standard | Double Density | High Density |