シングルモードファイバー接続ガラスフェルール、コネクター無し
- AR Coated Ferrules to Reduce Back Reflections
- Ø1.8 mm Ferrule is Easy to Handle
- 8° or 0° Face Angle
SMPF0215
SMPF0115
8° Face Angle
0° Face Angle
Bare Fiber
Please Wait
Click to Enlarge
端面角度が8°のGRIN23シリーズレンズと、
SMPF01シリーズガラスフェルールを
スリーブ51-2800-1800(下記参照)で接続
Click to Enlarge
端面角度が0°のGRIN29シリーズレンズと、
SMPF02シリーズガラスフェルールを
スリーブ51-2800-1800(下記参照)で接続
Common Specifications | |
---|---|
Ferrule Diameter | 1.800 mm ± 5 µm |
Ferrule Length | 5.5 mm ± 0.5 mm |
Ferrule Material | Borosilicate Glass |
Wedge Tolerance | ±1.00° |
Fiber Length | 1.5 m |
特長
- 633、830、1064 nm、または1310/1550 nm対応のARコーティング
- 屈折率分布型(GRIN)レンズと簡単に組み合せ可能な設計
- 端面角度:0°または8°
- 通信関連用途に適した製品
当社のコネクタ無しシングルモードファイバ接続ガラスフェルールは GRINレンズと一緒に使用して、可視、近赤外または赤外光を、ファイバ-自由空間光学系に簡単に結合できるよう設計されています。 ホウケイ酸ガラスフェルールが当社のシングルモードファイバに接続しています。当社ではコネクタ付きのシングルモードファイバ接続ガラスフェルールのほか、偏波保持ファイバ接続ガラスフェルール(コネクタ付き)もご用意しております。
これらのフェルールと当社のさまざまなGRINレンズを組み合わせて使用して、半導体レーザのファイバへの結合や、レーザ光のディテクタへの集光またはレーザ光のコリメートなど、幅広い実験ニーズに対応させることができます。これらのガラスフェルールは、光学アイソレータ、光スイッチ、光サーキュレータなどの光コンポーネントで使用されています。 Ø1.8 mmフェルールは、フェルール無しのむき出しファイバよりも大幅に扱いやすくなっています。フェルールに1.5 m長のシングルモードファイバが接続されています。一方の終端は、ファイバ素線です。
これらのフェルールには、633、830、1064 nm、または1310/1550 nmのいずれかに対応するARコーティングが施されています。 ARコーティングは、設計波長での反射を0.25%未満に抑えるため、後方反射光と挿入損失を抑えることができます。 この全4種類のコーティングは、端面に0°と8°の角度が付いたフェルールに施せます。 端面角度が8°のタイプでは、光軸とは異なる方向に後方反射光を反射させるので反射減衰量が最も大きくなります。コリメータの部品としてお勧めです。 これに対して端面角度が0°のタイプはアライメントが簡単ですが、通常のファイバ-ファイバ結合でのご使用時しかお勧めできません。当社のGRINレンズシリーズは、ピグテール付きフェルールと組み合わせられるように、端面に0°または8°の角度がついています。当社のガラスフェールに対応するGRINレンズのラインナップについては「コリメーターアセンブリ」のタブをご参照ください。
当社ではまた、コネクタ付きファイバ端面のコア同士を正確にアライメントするため、スリーブも豊富にご用意しております。 GRINレンズとファイバを予め組み合わせた製品は、ピグテール付き非球面レンズファイバーコリメータまたは、ピグテール付きGRINレンズファイバーコリメータ(シングルモード、マルチモード、偏波保持)をご覧ください。当社の在庫にお客様の用途に合う製品がない場合は、カスタム仕様のパッチケーブルをご提案可能です。当社までお問い合わせください。
Click for Details
RINレンズ、スリーブ、ガラスフェルール
(それぞれ別売り)
Click to Enlarge
当社ではこれらの部品の接続にUV硬化光学素子用接着剤のご使用をお勧めいたします。
GRINレンズを使用してガラスフェルールからの出力光をコリメート
すべてのガラスフェルールは、当社のGRINレンズシリーズとスリーブ51-2800-1800(下記参照)を使用してコリメートできます。このコリメータを組み立てるには、レンズとフェルールをスリーブの両端から挿入します(右写真参照)。レンズとフェルールを徐々にスリーブに接触させることで、GRINレンズとフェルールの端面が平行であることを確認します。その後、レンズとフェルールを離して焦点を調節します。組立ての際、バネ付きのマイクロV字型クランプまたはピンセットをお使いいただくと、これらの小さな円筒形部品が扱いやすくなります。
SMPF01ならびにPMPFXシリーズのガラスフェルールの端面角度は8°のため、端面角度が8°のGRIN23シリーズレンズが取り付け可能です。SMPF02シリーズのガラスフェルールの端面角度は0°で、端面角度が0°のGRIN29シリーズレンズに対応します。
偏波保持ファイバまたはシングルモードファイバ接続ガラスフェルールやそれらに対応するGRINレンズを選択する際は下の表をご覧ください。当社の偏波保持ファイバ接続ガラスフェルールは、FC/PCまたはFC/APCコネクタ付きで、シングルモードファイバ接続ガラスフェルールはFC/PCおよびFC/APCの両コネクタに加え、コネクタ無しでもご提供しています。
Selection Guide | |||||||
---|---|---|---|---|---|---|---|
Wavelength | Face Angle | Compatible GRIN Lensesa | PM Pigtailed Ferrule | SM Pigtailed Ferrule | |||
FC/PC | FC/APC | FC/PC | FC/APC | No Connector | |||
630 nm | 8° | GRIN2306A | PMPFX1 | PMPFX4 | - | - | - |
0° | GRIN2906 GRIN2906C | - | - | - | - | - | |
633 nm | 8° | GRIN2306A | - | - | SMPF0106-FC | SMPF0106-APC | SMPF0106 |
0° | GRIN2906 GRIN2906C | - | - | SMPF0206-FC | SMPF0206-APC | SMPF0206 | |
780 nm | 8° | GRIN2307AC | PMPFX2 | PMPFX5 | - | - | - |
0° | GRIN2907C | - | - | - | - | - | |
830 nm | 8° | GRIN2308A GRIN2308AC | - | - | SMPF0108-FC | SMPF0108-APC | SMPF0108 |
0° | GRIN2908 GRIN2908C | - | - | SMPF0208-FC | SMPF0208-APC | SMPF0208 | |
980 nm | 8° | GRIN2309AC | PMPFX7 | PMPFX9 | - | - | - |
0° | GRIN2909C | - | - | - | - | - | |
1064 nm | 8° | GRIN2310A GRIN2310AC | PMPFX8 | PMPFX10 | SMPF0110-FC | SMPF0110-APC | SMPF0110 |
0° | GRIN2910 GRIN2910C | - | - | SMPF0210-FC | SMPF0210-APC | SMPF0210 | |
1310/1550 nm | 8° | GRIN2313A GRIN2315A | - | - | SMPF0115-FC | SMPF0115-APC | SMPF0115 |
0° | GRIN2913 GRIN2915 | - | - | SMPF0215-FC | SMPF0215-APC | SMPF0215 | |
1550 nm | 8° | GRIN2315A | PMPFX3 | PMPFX6 | - | - | - |
Posted Comments: | |
Yuanhang Zhang
 (posted 2021-02-08 15:06:01.623) I want to order some ferrules without the pigtailed fiber. We have MMF in our lab, and I want to use the ferrule to make some MMF collimators. YLohia
 (posted 2021-02-08 03:55:54.0) Hello, custom items can be requested by clicking on the "Request Quote" above or by emailing techsupport@thorlabs.com. We will discuss the possibility of offering this directly. user
 (posted 2019-04-17 22:10:35.21) So what is the 1 over e2 (or FWHM) size of the gaussian beam coming out? How much smaller than the 1.8mm diam? Pse publish spec. This will allow me to calc the diffracted spot at long distance YLohia
 (posted 2019-04-18 02:32:33.0) Hello, these are not collimated modules. You would still have to place the GRIN lens and collimate the beam yourself, which is why we do not have a beam diameter spec since it is entirely dependent on the lens placement by the user. However, we do specify the NA and the MFD of the fiber is given, which can be used to estimate the beam diameter. pdeslandes
 (posted 2015-03-12 16:22:22.253) Hello,
I would like to have two quotes for 1-10-50-300 of 0° ferrule using PM780 HP fiber:
- AR@808nm
-no coating
feel free to contact me.
I must say i've already been very happy with similar products purchased at thorlabs.
pierre besembeson
 (posted 2015-03-26 01:42:29.0) Response from Bweh at Thorlabs USA: I will followup with you via email for a quotation. cuig
 (posted 2013-11-14 14:50:54.257) Can you give me a quote or part# for the empty 1.8mm glass ferrule (0 degree face agngle)? I need to assemble a pigtailed fiber using fibers not listed here. Thanks.
Guohong pbui
 (posted 2013-11-20 10:02:34.0) Response from Phong at Thorlabs: We have contacted you directly about offering this as a custom component. zagorulko
 (posted 2013-04-24 07:52:03.09) Hello,
Could you let me know Maximum CW Power of SMPF0115 and SMPF0110?
Thank you,
Konstantin tcohen
 (posted 2013-04-25 15:14:00.0) Response from Tim at Thorlabs to Konstantin: The fiber in the SMPF0115 is SMF-28e+. An estimated power threshold would be about 450mW theoretical max and the smaller MFD of the HI1060-J9 in the SMPF0110 would reduce the max power handling to be about 180mW. Please note that a buffer should be inserted and a more practical number would be ¼ of this. Increasing coupling efficiency before raising the power and making sure all surfaces are clean and free of dust/dirt accumulation are good practices, but especially so if you’re trying to use it at the power limits. |
Item # | Face Angle | AR Coating Rangea | Reflectance Over AR Coating Range | NA | Operating Wavelength | Cutoff Wavelength | Fiber Type | Reference Diagram |
---|---|---|---|---|---|---|---|---|
SMPF0106 | 8° | 633 ± 15 nm | Ravg < 0.25% | 0.12 | 600 - 800 nm | 500 - 600 nm | SM600 | |
SMPF0108 | 830 ± 15 nm | Ravg < 0.25% | 0.12 | 800 - 1000 nm | 660 - 800 nm | SM800-5.6-125 | ||
SMPF0110 | 1064 ± 15 nm | Ravg < 0.25% | 0.14 | 980 - 1650 nm | 920 ± 50 nm | HI1060 | ||
SMPF0115 | 1310/1550 ± 40 nm | Rmax < 0.25% | 0.14 | 1260 - 1620 nm | < 1260 nm | SMF-28 Ultra | ||
SMPF0206 | 0° | 633 ± 15 nm | Ravg < 0.25% | 0.12 | 600 - 800 nm | 500 - 600 nm | SM600 | |
SMPF0208 | 830 ± 15 nm | Ravg < 0.25% | 0.12 | 800 - 1000 nm | 660 - 800 nm | SM800-5.6-125 | ||
SMPF0210 | 1064 ± 15 nm | Ravg < 0.25% | 0.14 | 980 - 1650 nm | 920 ± 50 nm | HI1060 | ||
SMPF0215 | 1310/1550 ± 40 nm | Rmax < 0.25% | 0.14 | 1260 - 1620 nm | < 1260 nm | SMF-28 Ultra |