直線移動ステージ(リニアステージ)、移動量25 mm、手動アジャスター付き、クロスローラーベアリング
- Micrometer or Differential Drive Options
- Crossed-Roller Bearings for High Load Capacity
- Solid, All-Steel Construction
LNR25M
Micrometer Drive Stage
LNR25D
Differential Drive Stage
LNR25P2
Angle Bracket
LNR25P1
Base Plate
Three LNR25D Stages Mounted
in an XYZ Configuration
Please Wait
TravelMax™ Specificationsa | ||
---|---|---|
Travel | 25 mm (1") | |
Minimum Step Size | 1, 10, or 25 µmb | |
Barrel Diameter | Ø3/8" (Ø9.5 mm) | |
Horizontal Load Capacity | 20 kg (44 lbs) | |
Vertical Load Capacity | 8 kg (17.6 lbs) | |
Runout Over Full Range | ±1.5 µm (±0.000059") | |
Bearings | Crossed Roller | |
Body Construction | All Steel | |
Weight (Including Drives) | LNR25D: 0.57 kg (1.26 lbs) LNR25M: 0.61 kg (1.34 lbs) |
Click to Enlarge
3つのステージLNR25D(/M)を使ったXYZ構成の背面図
Click to Enlarge
LNR25シリーズの上部プレートには取付け用M6タップ穴が付いています。
特長
- 移動量25 mm(または1インチ)
- 差動アジャスタ付きまたはマイクロメータ付き
- 頑丈で熱整合した全スチール構造
- 右手用または左手用のXYZ構成が可能
- 長寿命
LNR25シリーズの直線移動ステージ(リニアステージ)は安定性に優れていて高耐荷重なので、色々な移動用途に適しています。頑丈なスチール構造と高耐荷重クロスローラーベアリングにより、 移動の全範囲にわたり均一した性能を発揮します。 LNR25M/Mには、標準の25 mm移動量のマイクロメータ150-801STが装着されていて、25 mmの全移動範囲にわたって1回転につき0.5 mm移動します。また、0.01 mm単位の目盛が付いています。
より高い分解能を必要とする用途には、差動アクチュエータDM12 が付いたLNR25D/Mがあります。粗調整では、25 mm範囲にわたって1回転につき318 μm移動する0.5 mmピッチネジを採用しています。粗調整は取付けカラーにあるつまみネジを使って固定することができます。0.5 μm単位の目盛が付いた差動ドライブでは、250 μmにわたって1回転につき25 μm移動します。
高性能のリニアレールを用いて設計されていて、熱的に整合した材質を使用することによって、理想的ではない環境下でも安定して優れた性能を示します。アクチュエータの反対側にある固定ネジによって、移動ステージを位置固定することも可能です。当社ではこちらの手動アクチュエータのほかにもステッピングモータ付き移動ステージ(LNR25ZFS/M)をご用意しております。LNR25シリーズステージは薄型のステッピングモータ付きアクチュエータZST225Bにも対応します。 また下記のステージに対応できるようネジアジャスタに取り付けられるバレルアダプタもございます。
Click to Enlarge
ベースプレートLNR25P1
Click to Enlarge
直角ブラケットLNR25P2
TravelMax Crossed-Roller Bearing Stages Selection Guide |
---|
1" (25 mm) Travel |
2" (50.8 mm) Travel |
幅広い取付け
TravelMax™は適応性と機能性を念頭において設計されています。 LNR25シリーズのステージ上面には、7つのM6のタップ穴アレイがあるので、部品を自由に取り付けることができます。上部プラットフォームには2つのM6ザグリ穴に通じる貫通穴があるので、ステージを作業面に直接ボルトで固定することができます。 アクチュエータの取付け位置は、簡単に右手用または左手用へと再構成することが可能です。
ベースプレートLNR25P1(左写真)により取付けのオプションが増え、ステージと作業面の間に隙間を作ることができます。 ザグリ貫通穴は、ステージのベースにあるタップ穴に適合しているので、直交する2方向に取り付けることができます。 プレートの寸法は65.3 mm x 90.5 mm x 10 mmです。2本の位置決めピンが付属しており、直交性を保ちながら取り付けられるように4つのアライメント用穴が付いています。
1 軸以上の動きが求められる場合は、複数のLNR25シリーズステージをボルト止めしてXY、XZ、YZ、XYZ構成の構築が可能です。 左はLNR25P2による、Z方向の動きに必要な垂直取付けの写真です。 このプレートは、4本の位置決めピンが付属しており、ステージを直交性を保ちながら取り付けられるように各面に4つのアライメント用穴が付いています。
TravelMax™ Specifications | ||
---|---|---|
Travel | 25 mm (1.0") | |
Horizontal Load Capacity | 20 kg (44 lbs) | |
Vertical Load Capacity | 8 kg (17.6 lbs) | |
Runout Over Full Range | ±1.5 µm (±0.000059") | |
Bearings | Crossed Roller | |
Body Construction | All Steel | |
Weight (Including Drives) | LNR25D/M: 0.57 kg (1.26 lbs) LNR25M/M: 0.61 kg (1.34 lbs) |
DM12 Differential Drive Specifications [Included with LNR25D(/M)] | |
---|---|
Coarse Travel | 25 mm (1.0") |
Coarse Distance per Rev | 0.5 mm |
Fine Travel | 250 µm |
Fine Distance per Rev | 25 µm |
Fine Graduation | 0.5 µm |
Weight | 46.1 g (1.6 oz) |
Micrometer Specifications | ||
---|---|---|
Item # | 150-811ST (Included with LNR25M) | 150-801ST (Included with LNR25M/M) |
Travel | 0 - 1.000" | 0 - 25.00 mm |
Graduation | 0.001" per Division | 10 µm per Division |
Distance per Rev | 0.025" | 0.5 mm |
Scale Surface | Hard-Chrome Plating | |
Weight | 89.5 g (3.15 oz) |
Posted Comments: | |
Andrey Revyakin
 (posted 2023-05-02 09:56:45.933) Would it be possible to upload left-handed versions of the stage in CAD formats as well? Thanks! do'neill
 (posted 2023-05-02 09:32:47.0) Response From Daniel at Thorlabs. Thank you for your feedback. I will pass on your suggestion and in the meantime I will reach out to you directly to discuss your application. Georgy Onishchukov
 (posted 2020-08-12 06:47:42.577) The stage is mounted horizontally, load of about few kg is mounted just outside the upper stage plate. By about 15 mm travel from zero position the pitch deviation is still too strong for our application.
A solution might be a better (tighter) alignment of the V-grooves. Unfortunately no information about the procedure in the manual. Could you provide us with it? cwright
 (posted 2020-08-17 04:58:53.0) Response from Charles at Thorlabs: Hello Georgy and thank you for contacting us. Our technical support team will reach out to you about your application. sharrell
 (posted 2012-02-29 16:24:00.0) A Response from Sean at Thorlabs: Thank you for your feedback. I apologize that we do not specify a consistent set of specifications across our two product lines. I've spoken with the product engineers, and we will endeavor to test both sets of stages under the same conditions in the near future. We don't have your email address, but if you'd like us to contact you with a status update, please write us at techsupport@thorlabs.com. user
 (posted 2012-02-29 03:38:23.0) You do a good job listing the specs of the cheaper aluminum stages but on these expensive steel stages so many of the specs are missing. I get the feeling they might not be as good as the aluminum stages even with the roller bearings. Why should I spend more for a stage which might be inferrior to the aluminum stages. I see the angular deviation is 244 urad which is not that good for the price. The alum stage had 250 urad for much less. Do you see my point? bdada
 (posted 2011-09-20 17:53:00.0) Response from Buki at Thorlabs:
Thank you for your feedback. We have already contacted you with this information. karthick
 (posted 2011-09-11 03:38:13.0) Please send me the solidworks file of LNR25D stage.
I have solidworks 2010 and it says that i cant open as its a future verison.
Thanks
karthick jjurado
 (posted 2011-06-29 09:39:00.0) Response from Javier at Thorlabs to acable: Thank you very much for your feedback. We will add a photo of the LNR25P2 mounting plate which shows the 8 alignment pin holes (4 on each axis) shortly. acable
 (posted 2011-06-28 15:40:29.0) The base plate appears to have alignment pins, but there is no indication that the angle bracket has similar alignment features. Please carify how the stage can be bulit up into a 3 axis system ensuring the orthogonality of the 3 axis. Customer Email: acable@thorlabs.com bdada
 (posted 2011-04-08 12:33:00.0) Response from Buki at Thorlabs:
Thank you for your feedback. Below is our measured angular deviation data:
Pitch: 53 µrad
Yaw: 244 µrad
We will work on updating our website with this information. Please contact TechSupport@thorlabs.com if you have further questions. user
 (posted 2011-04-07 13:52:49.0) What is the angular deviation of these stages? jjurado
 (posted 2011-03-11 10:36:00.0) Response from Javier at Thorlabs to patrick.parkinson: Thank you for submitting your inquiry. We can certainly offer the LNR25 stage without the micrometer or differential drive. Keep in mind that this stage is compatible with the ZST25B motorized actuator, which includes a 3/8" diameter barrel, whereas the regular ZST25 is 1/4"-80 threaded. I will contact you directly for processing a formal quotation. patrick.parkinson
 (posted 2011-03-11 06:52:46.0) Is it possible to purchase this stage with no drive? I already have some ZST 25 type motorised translation stages, I would like to use these with the LNR25 translation stage (as long as it is compatible). Thanks. |
手動リニアステージ
手動の移動ステージとして、最大移動量が6 mm以下から50 mmまでのステージをご用意しています。ステージの多くはXY軸やXYZ軸などの多軸構成での注文が可能です。ファイバ結合用としては、多軸ステージのページをご覧ください。標準の手動ステージを用いるよりも精密な調整が可能です。直線移動ステージのほかにも、回転ステージ、ピッチ&ヨープラットフォームおよびゴニオメータもご用意しております。また、DCサーボモータ、ステッピングモータ、またはダイレクトドライブ技術を用いた電動移動ステージもご用意しています。
クロスローラーベアリングステージ
こちらの直線移動ステージの移動機構には、精密移動、高耐荷重、小角度偏差といった特性を有するクロスローラーベアリングが用いられています。LNRシリーズステージの本体はスチール製、LX、XRNおよびXRシリーズステージの本体はアルミニウム製です。当社ではクロスローラーベアリングを用いた垂直移動ステージもご用意しております(下記参照)。
Crossed-Roller Bearing Stages | ||||||
---|---|---|---|---|---|---|
Product Family | LNR Series 25 mm Stages | LX Series 25 mm Stages | XRN Series 25 mm Stages | XR Series 25 mm Stages | XR Series 50 mm Stages | LNR Series 50.8 mm Stages |
Click Photo to Enlarge | ||||||
Travel | 25 mm (0.98") | 25 mm (0.98") | 25 mm (0.98") | 25 mm (0.98") | 50 mm (1.97") | 50.8 mm (2") |
Drive Type | Multiple | Micrometer | Micrometer | Micrometer | Micrometer | Multiple |
Platform Size | 2.34" x 2.36" (59.4 mm x 60.0 mm) | 2.56" x 2.56" (65.0 mm x 65.0 mm) | 2.00" x 3.35" (50.7 mm x 85.0 mm) | 2.98" x 4.33" (75.7 mm x 110.0 mm) | 2.98" x 5.51" (75.7 mm x 140.0 mm) | 3.94" x 3.94" (100.0 mm x 100.0 mm) |
Possible Axis Configurations | X, XZ, XY, XYZ | X, XY, XZ, YZ, XYZ | X, Y, Z, XY, XZ, YZ, XYZ | X, Y, Z, XY, XZ, YZ, XYZ | X, Y, Z, XY, XZ, YZ, XYZ | X, XY, XYZ |
Additional Details |
ボールベアリングステージ
こちらの移動ステージでは、精密移動と長寿命を実現するために、硬化スチール製リニアベアリングが用いられています。様々なアクチュエータが付いた製品や、1軸ステージや予め多軸ステージとして構築された製品をご用意しております。
Ball Bearing Stages | |||||
---|---|---|---|---|---|
Product Family | MS Series 1/4" Stages | T12 Series 1/2" Stages | MT Series 1/2" Stages | PT Series 1" Stages | LT Series 2" Stages |
Click Photo to Enlarge | |||||
Travel | 1/4" (6.4 mm) | 1/2" (12.7 mm) | 1/2" (12.7 mm) | 1" (25.4 mm) | 2" (50 mm) |
Drive Type | Multiple | Thumbscrew | Multiple | Multiple | Differential Micrometer |
Platform Size | 1.17" x 1.17" (29.7 mm x 29.7 mm) | 0.76" x 0.81" (19.3 mm x 20.6 mm) | 2.40" x 2.41" (61.0 mm x 61.2 mm) | 3.00" x 4.00" (76.2 mm x 101.6 mm) | 3.75" x 3.75" (95.3 mm x 95.3 mm) |
Possible Axis Configurations | X, XY, XYZ | X, XY, XYZ | X, XY, XYZ | X, XY, XYZ | X, XY, XYZ |
Additional Details |
アリ溝式ステージ
これらの小型ステージの移動機構にはアリ溝と送りネジが組み込まれています。一般的な移動制御用に適したステージです。
Dovetail Stages | |||
---|---|---|---|
Product Family | DT Series 1/2" Stages | DTS Series 1" Stages (Vacuum-Compatible Version Available) | DTS Series 2" Stage |
Click Photo to Enlarge | |||
Travel | 1/2" (12.7 mm) | 1" (25 mm) | 2" (50 mm) |
Drive Type | Thumbscrew | Thumbscrew | Thumbscrew |
Platform Size | 1.00" x 1.00" (25.4 mm x 25.4 mm) | 2.68" x 2.95" (68.0 mm 75.0 mm) | 2.68" x 3.74" (68.0 mm x 95.0 mm) |
Possible Axis Configurations | X, XY, XYZ | X, XY, XYZa | X, XY, XYZ |
Additional Details |
フレクシャーステージ
移動ステージNanoflex™には摩擦の無いフレクシャー機構が用いられており、ベアリングを用いた同様のステージと比較して位置決め性能と分解能が向上しています。ステージの移動は、取付けプラットフォームに取り付けられた連結部の弾性変形(たわみ)によって実現されています。多くのモデルには、微細な位置調整用にピエゾアクチュエータも付属します。
Flexure Stages | ||||
---|---|---|---|---|
Product Family | Nanoflex™ 1.5 mm Stage | Nanoflex™ 5 mm Stages | ||
Click Photo to Enlarge | ||||
Travel | 1.5 mm (0.06") + 25 µm Piezo | 5 mm (0.20") | 5 mm (0.20") + 20 µm Piezo | |
Drive Type | Thumbscrew and Piezo Actuator | Differential Micrometer | Differential Micrometer and Open-Loop Piezo Actuator | Differential Micrometer and Closed-Loop Piezo Actuator |
Platform Size | 1.18" x 1.18" (30.0 mm x 30.0 mm) | 2.95" x 2.95" (75.0 mm x 75.0 mm) | ||
Possible Axis Configurations | X, XY, XYZ | X, XY, XYZ | X, XY, XYZ | X, XY, XYZ |
Additional Details |
垂直移動ステージ
当社では精密移動用のクロスローラーベアリングを用いた垂直移動ステージや、高荷重用の長距離垂直移動ステージもご用意しております。
Vertical Stages | ||||||
---|---|---|---|---|---|---|
Product Family | XRN Series 9 mm Vertical Stage | XR Series 14 mm Vertical Stage | MVS Series 1/2" Vertical Stage | MVS Series 1" Vertical Stage | VAP Series 4" Vertical Stage | VAP Series 10" Vertical Stage |
Click Photo to Enlarge | ||||||
Travel | 9.0 mm (0.35") | 14.0 mm (0.55") | 1/2" (13.0 mm) | 1" (25.0 mm) | 4" (101.6 mm) | 10" (254 mm) |
Drive Type | Worm-Gear Driven Lift Screw | Micrometer | Adjuster Knob and Coarse Manual Positioning | |||
Platform Size | 2.00" x 2.00" (50.7 mm x 50.7 mm) | 2.98" x 2.98" (75.7 mm x 75.7 mm) | 2.36" x 2.36" (60.0 mm x 60.0 mm) | 3.00" x 6.00" (76.2 mm 152.4 mm) | ||
Additional Details |