SM1シリーズ、34 mmレール用アダプタープレート
- Use Internal Bore of 34 mm Rail as a Beam Path
- Internal SM1 (1.035"-40) Threading for Use with Ø1" Lens Tubes
- Attaches to Rail End
XT34SM1
XT34SM1
Shown with a Lens Tube
and Optical Rail
(All Sold Separately)
Please Wait
特長
- 34 mmレールとSM1レンズチューブを接続
- SM1の内ネジ加工
- 4個のM3キャップスクリュ(付属)用の4つのザグリ穴
このレンズチューブ接続アダプタXT34SM1では、標準の34 mmレールのØ29 mmの内孔を利用します。このアダプタを用いると、レールの終端部にSM1の内ネジが取り付けられて、Ø25 mm~Ø25.4 mm(Ø1インチ)の光学素子および当社のSM1シリーズの機械部品と接続できるようになります。アダプタープレートは付属の4個のM3キャップスクリュを使って位置固定します。
当社では多岐にわたるアクセサリを34 mmレール用に提供しています。例としては角度クランプやブラケット、ブレッドボード用取付けプレート、レールキャリア、取付けプラットフォーム、レンズチューブ用アダプタそしてレールジョイントがあります。66 mmと95 mmのレールをXT34シリーズの機構に組み込むためのサイズアダプタと一緒に用いることで、事実上どのようなオプトメカニクスを用いた配置にも対応できる多用途で堅牢なツールになります。
XT34 34 mm Optical Rail Accessories | ||||||||
---|---|---|---|---|---|---|---|---|
Rails | Rail Platform Positioners | Clamps and Angle Brackets | Breadboard Mounting | Size Adapters | Rail Joiners | Rail Carriers | Mounting Platforms | Lens Tube Adapter |
Posted Comments: | |
Greg
 (posted 2009-02-16 08:47:19.0) A response from Greg at Thorlabs to whg21: Thank you for your interest in Thorlabs products. The XT66P1 is designed for both imperial and metric applications. For metric, you will need 4 M6 tapped holes spaced 75 mm x 50 mm on your breadboard. I attached this plate to a metric board to double check the clearances and it will mount properly. whg21
 (posted 2009-02-14 08:20:32.0) Im trying to establish if you have a version of the rail mounting plate (comparable to the XT66P1) that can be easily mounted onto a metric (25mm hole spacing) breadboard.
It seems the XT66P1 is imperial and as such will be 1mm out. |